2 Person Jetted Tub | Neo-angle Corner Bathtub for Small Bathrooms
● Hydro Massage System: The jetted bathtub is equipped with reliable pump motor and jetted parts, and the hydro massage system will improve the bathing comfort. You will feel refreshed and energized after a calming yet invigorating massage tub bathing.
● Dimensions & Installation: Overall Dimension: 47*47*25 inches (1200*1200*630 MM), Effective Tub Capacity: 55 Gallons. Please measure the exact bathroom tub installation size before your order.
● Solid Construction: HOMURG jet bathtub is made of 100% premium acrylics and reinforced by durable fiberglass. All of these are top quality materials which are rarely used by low-quality brands due to a relatively high cost.
● Jetted Bathtub with Backrest and Headrest: HOMURG jetted bathtub is designed with comfortable style according to the sloping lines of the natural curves of human body. And the jetted tub will supply a relaxed bathing for family members by keeping back on the backrest and head on the headrest.
● Top-quality Drain and Pipe: HOMURG jetted bathtub includes anti-leak design drain & pipe system which is tough and durable, anti-odor and easy to install. With HOMURG bathtub, NO cheap drain/hose, NO leak trouble.
|FOB Price:||Please send an inquiry to ask for price!|
|Production Capacity:||12,000 Sets per Month|
|Port:||Shenzhen, Guangzhou, Foshan|
|Payment Terms:||T/T, L/C, D/P, D/A.|
|Main Body Materials:||Acrylic and Fiberglass Reinforcement|
|Exterior Dimensions:||47*47*25 inches (1200*1200*630 MM)|
|Water Capacity:||40 Gallon (151 L)|
|Jet Settings:||Included, Hydro Massage System.|
|Voltage:||AC 110-240 Volt, 60 HZ|
|Overflow Drain:||Yes, Equipped on the back of switch knob.|
|Pop-up Drain:||Included, Controlled by the switch knob.|
|Tub Installation:||Corner Alcove|
|Tub Features:||Slip-Resistant Tub, Adjustable Jet Direction|
|Faucet Mount:||Deck Mounted.|
|Exterior Bath Shape:||Neo-angle Round and Corner|
|Style:||Modern, Classic, Minimalist.|
|Bath Therapy Type:||Jetted-Whirlpool|
|Usages:||Bathroom or Hotel Shower|
|Maximum Number of Occupants:||2 Persons|
|Package Included:||Bathtub Cover, Jetted Parts, Overflow, Drain and Hose.|
|Warranty:||Limited 5-year manufacturer’s warranty on bathtub surface and structure. Limited 1-year on pump motors, jetted and plumbing parts.|
The HOMURG 2 Person Jetted Tub, Neo-angle Corner Bathtub for Small Bathrooms is constructed of acrylic with fiberglass reinforcement, and with dual fitted backrests and headrests for more comfort. The HOMURG 2 Person Jetted Neo-angle Corner Bathtub lets you feel refreshed and energized with a calming yet invigorating massage. This jetted bathtub has a casual design that will compliment your bathroom in most of styles.
HOMURG Kitchen and Bath Limited is a professional 2 Person Jetted Tub Supplier in China. Why Choose 2 Person Jetted Tub, Neo-angle Corner Bathtub for Small Bathrooms?
Jetted & Hydro Massage System
The jetted bathtub is equipped with reliable pump motor and jetted parts, and the hydro massage system will improve the bathing comfort. You will feel refreshed and energized after a calming yet invigorating massage tub bathing.
Solid Construction Tub
Formed with two layers of acrylic, bringing maximum insulation and keeping water at its desired temperature longer while soaking, HOMURG jetted bathtub is made of 100% premium acrylics and reinforced by durable fiberglass. All of these are top quality materials which are rarely used by low-quality brands due to a relatively high cost. And the acrylic-structured bathtub is solid for bathing for a long time peace of mind.
Corner Jetted Bathtub
The HOMURG jetted bathtub is installed in the corner with 2 sides against wall. You can locate a place in a corner according to your bathroom layout design and ask a professional construction worker or installer to install it.
Comfortable Soaking Bathtub with Backrest and Headrest:
The HOMURG jetted bathtub is designed according to the curve lines of human beings and with slip-resistant floor for safe. The gentle slope that offers a more comfortable, leisurely soak. In addition, dual headrests and backrests have been adapted to the bathtub to accommodate 2 people for more comfort. You can enjoy a relaxed bathing in the comfortable soaking bathtub after a day of intense work.
Professional Construction Installation
The jetted bathtub is recommended to be installed by professional jetted bathroom installer. To ensure maximum performance and pleasure from this product, all of the installation job must be done by professional electrical construction worker or plumbers according to the instructions.
1 x HOMURG Jetted Bathtub
1 x Overflow and Drain
1 x Pop-up Drain
1 x Flexible Drain Pipe
HOMURG 2 Person Jetted Tub, Neo-angle Corner Bathtub is the perfect improvement for small bathroom decoration and daily bathing life.
Welcome to send an inquiry to us, 2 Person Corner Jetted Tub Supplier!
How to Install HOMURG 2 Person Jetted Tub, Neo-angle Corner Bathtub for Small Bathrooms?
The HOMURG jetted bathtub is suggested to install by professional construction installer or plumber, and a licensed electrician. Please see the general bathtubs installation instructions file. The detailed installation instructions are as below:
Spirit Level, Wrench, Tape, Marking Pencil, Silicone Gun etc.
Step 1: Clean, level, and prepare the floor for installation.
Step 2: Place the bathtub in the exact installed position on the floor and trace the outline of the bath with a pencil or any erasable marking (figure 1).
Step 3: Determine the location of the drain pipe, on the floor by taking measurements of the drain and waste location underneath the bathtub (figure 2).
Note: Drain and waste locations will vary by different models.
Step 4: Using a blanket, cardboard, or other clean protective surface, turn the bathtub on its side so that the bathtub is properly supported during drain installation.
Step 5: Clean the drain hole area in preparation of setting the drain. The area should be dry and free of any debris.
Install Drain Hardware:
Step 6: Apply a bead of clear silicone or plumbers putty around the Drain Body and pass it through the drain hole (figure 3).
Step 7: Apply plumbers putty to the washer and slide it over the bottom of the drain body (figure 3).
Step 8: Slide the paper washer over the drain body.
Step 9: Attach the Drain Body Nut on the Drain Body and tighten until the Nut and Washer have created a seal with the bottom of the bathtub. DO NOT Overtighten (figure 4)!
Prepare Tail Pieces (figure 5)
All parts involved in tail piece installation are provided by the installer.
Step 10: Drain waste vent must always be installed according to local standard. Verify the placement of the bathtub before drilling the hole for the drain waste vent.
Step 11: Install 1 1/2” rubber slip gasket over the drain waste vent.
Step 12: Cut tail piece to desired length (will vary for each installation).
Step 13: Slide tail piece nut over tail piece towards flanged end.
Step 14: Connect tail piece assembly to waste vent.
Step 15: Place flange washer on top of tail piece.
Step 16: Apply a generous bead of adhesive or silicone to the bottom of the tub supports (figure 6).
Step 17: Then apply a bead of bathtub and tile caulk around the edge of the base (figure 6).
Step 18: Carefully set bathtub into position (figure 7) and connect the drain hardware (previously installed). Finish the installation of the tailpiece installation.
Install Jetted System (Whirlpool Electrical Installation Instructions):
All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes.
WARNING: When using electrical products, basic precautions should always be observed, including the following:
Step 19: Danger: Risk of Electric Shock! Connect only to a circuit protected by a ground-fault circuit interrupter.
Step 20: Grounding is required. The unit should be installed by a licensed electrician and grounded.
Step 21: Permit access for servicing motor as noted.
Step 22: All building materials and wiring should be routed away from the pump body and heater (if equipped).
The whirlpool should be installed on a 120 vac, 20 amp dedicated GFCI circuit.
The circuit should be hard-wired from the electrical power supply panel. The circuit must be a three (3) wire circuit from the electrical supply panel. A grounded neutral wire and a third wire, earth ground, are essential. Optional heater requires a separate 15 amp maximum GFCI circuit.
Install a separate 110-240V AC/15AMP dedicated circuit with GFCI (Ground Fault Circuit Interrupter) protection.
At initial start-up with power ON, push the GFCI test button. The reset button should pop out. Push this button in to reset. If the GFCI fails to operate in this manner, there is a ground fault or malfunction, indicating the possibility of electrical shock. Turn off the power and do not use the bath until the source of the problem has been identified and corrected.
Step 23: Route two separate branch circuits to the junction box near the whirlpool. Each branch circuit must be GFCI Protected and must use copper conductors only.
Step 24: Ensure the h pump are properly Grounded and Bonded as required. Attach the 8 AWG solid copper conductor supplied with the heater from the heater bonding lug to the motor frame bonding lug. The conductor is secured to the lugs using set screws. The motor frame shall have a second 8 AWG solid copper conductor connected from the frame bonding lug to the homes electrical panel or approved local bonding point.
Complete Bathtub Installation:
Step 25: Fill the bathtub with water to the overflow (if there is overflow) and then drain the bathtub while inspecting the waste connections below the floor for leaks. Access from below will be necessary for this step (figure 8).
Step 26: With the bathtub now in place, wipe off any excess bathtub and tile caulk and adhesive where the bathtub meets the floor.
Step 27: Run a bead of bathtub and tile caulk around the bottom edge of the bathtub where it meets the floor. Wipe off any excess caulk with a wet cloth (figure 9).
If installing on concrete slab or cannot move drain, the optional flexible drain hose may be used. One end attaches to the bathtub drain and the other end needs to be attached to the floor drain by using a transition piece that can be purchased at any home improvement store.